Hand & Power Tools Checklist

• Are handles kept tight on boxes?
• Are wooden handles free of splinters and cracks?
• Are wedges and chisels sharp (no burrs) and free of mushroomed heads?
• Are wrenches that have been sprung discarded?
• Are frames of electrical tools properly grounded if not double insulated?
• Are electrical tools provided with wiring and parts that are properly insulated?
• Are safety glasses, face shields or other PPE used while using hand tools that may produce flying materials or be subject to breakage?
• Are power tools used with the correct shield, guard or attachment recommended by the manufacturer?
• Are portable circular saws equipped with guards above and below the base show?
• Are all cord-connected electrical tools and equipment effectively grounded or of the approved double insulated type? Are portable fans provided with full guards or screens having opening of ½ inch or less?
• Is hoisting equipment available and used for lifting heavy objects, and are hoist ratings and characteristics appropriate for the task?
• Are ground-fault circuit interrupters provided on all temporary electrical 15 and 20 ampere circuits used during periods of construction?
• Are pneumatic and hydraulic hoses on power tools checked regularly for deterioration or damage?

XL Environmental • Risk Control Division • 520 Eagleview Boulevard, PO Box 636, Exton, PA 19341 • Phone: 800-327-1414 • Fax: 610-458-7285 • xlenvironmental.com

XL Environmental is a division of XL Specialty Insurance Company.